Press Release | Product Information for IOTA 9150 Organopolysilazane Resin: Room-Temperature Curing, High-Hardness Transparency, Anti-Graffiti, and Anti-Corrosion Applications
Hits: 313
img
**Press Release | Product Information for IOTA 9150 Organopolysilazane Resin: Room-Temperature Curing, High-Hardness Transparency, Anti-Graffiti, and Anti-Corrosion Applications**
IOTA has recently released product information for its organopolysilazane resin, **IOTA 9150** (also designated as **OPSZ-9150**). According to the documentation, **IOTA 9150** is a transparent polysilazane resin that is currently being produced in stable, commercial-scale quantities. Featuring Si-NH-Si bonds, the resin is capable of curing at room temperature—a process primarily driven by the hydrolysis and oxidation of these Si-NH-Si linkages. Furthermore, the Si-NH-Si bonds readily react with hydroxyl (-OH) groups on the surface of a substrate, ensuring excellent adhesion. The data also indicates that the addition of an appropriate catalyst can accelerate the reaction between Si-H and Si-NH-Si groups. Upon curing, the resin forms a three-dimensional cross-linked network, imparting superior mechanical properties—with a reported hardness of up to 9H. Once cured, **IOTA 9150** forms a transparent solid that is resistant to alcohols, ketones, and various other organic solvents. Specific performance characteristics should be verified based on the substrate, curing conditions, film thickness, and the actual application system.
**Simplified Structural Formula**
While the product documentation mentions a simplified structural formula for **IOTA 9150**, the specific chemical structure is not included in this release. Please refer to the official technical documentation provided by IOTA for the accurate simplified structural formula.
**Product Description**
**IOTA 9150** is a one-component product. It is soluble in solvents such as ethers and alkanes; however, it must not be diluted with alcohols or water. According to the product information, the cured **IOTA 9150** forms a transparent solid that exhibits resistance to alcohols, ketones, and other organic solvents. Because its Si-NH-Si bonds can undergo hydrolysis and oxidation at room temperature—and also react with -OH groups on substrate surfaces—**IOTA 9150** shows potential for enhancing substrate adhesion. The addition of an appropriate catalyst can promote reactions involving Si-H and Si-NH-Si groups, leading to the formation of a three-dimensional cross-linked structure upon curing. **Product Features**
| Feature | Description |
|---|---|
| UV Resistance | Inherent product characteristic |
| Non-flammable | Non-flammable after curing |
| Oxidation & Corrosion Resistance | Inherent product characteristic |
| Room-Temperature Curing | Contains Si-NH-Si bonds; cures at room temperature |
| Ease of Application | Inherent product characteristic |
| High Durability | Inherent product characteristic |
| Easy to Clean | Inherent product characteristic |
| Transparency | Forms a transparent solid upon curing; visible light transmission >90% |
| Solvent Resistance | Resistant to alcohols, ketones, and other organic solvents after curing |
| Single-Component | **IOTA 9150** is a single-component product |
| Dilution Restrictions | Soluble in ethers, alkanes, etc.; do not use alcohols or water for dilution |
**Technical Parameters**
| Property | IOTA 9150 Specifications |
|---|---|
| Product Name | Organopolysilazane IOTA 9150 (OPSZ-9150) |
| Appearance | Colorless, transparent liquid |
| Solid Content | >99% |
| Additive Content | 1.5% |
| Molecular Weight | 900 |
| Molecular Weight Distribution | 2.1 |
| Viscosity | 50 cPs |
| Liquid Density | 0.95 g/ml |
| Cured Density | 1.3 g/ml |
| Surface-Dry Time | 2 hours |
| Full Cure (20–25°C) | 3 days |
| Hardness After Curing (1 day at room temperature) | 4H |
| Hardness After Curing (3 days at room temperature) | 6H |
| Hardness after Curing (3 hours at room temperature, 2 hours at 120°C) | 8H |
| Transmittance (Visible Light) | >90% |
| Water Contact Angle | 105° |
| Metal Adhesion (Cross-cut Test) | Grade 0 |
The product description states that **IOTA 9150** can achieve a hardness of up to 9H after curing; the technical data sheet provides hardness values of 4H, 6H, and 8H depending on the specific curing conditions. Actual hardness performance should be verified based on curing conditions, film thickness, substrate, and the testing method employed.
**Applications**
According to product documentation, **IOTA 9150** can be used for anti-graffiti coatings on buildings, anti-corrosion coatings for metals, as a curing agent for silicone resins, and as a hardening agent for general organic resins. For applications such as anti-graffiti, anti-corrosion, silicone resin curing, or organic resin hardening, it is recommended to conduct validation testing tailored to the specific substrate, formulation system, curing conditions, and performance requirements.
**Packaging**
**IOTA 9150** is supplied in sealed 5-liter metal pails.
**Cleaning**
Proper cleaning procedures are essential. After use, tools should be promptly wiped clean using acetone or mineral spirits (solvent naphtha). Once **IOTA 9150** has cured, it cannot be removed by standard solvents; in such cases, it may be treated by soaking in a strong alkali—such as a 10% aqueous solution of sodium hydroxide—for at least 5 hours.
**Shelf Life**
The shelf life of unopened **IOTA 9150** is two years. Once opened, the usable life depends on storage conditions; if kept sealed in a cool, dry environment, it remains usable for at least six months.
**Precautions**
**IOTA 9150** should be used in a well-ventilated, dry environment. Appropriate protective measures—such as wearing gloves, a mask, and safety goggles—must be taken. Keep uncured **IOTA 9150** away from sources of fire, humid air, and water. Reseal the container promptly after use; if used in a humid environment, purge the container with nitrogen after the application is complete. Do not dilute **IOTA 9150** with alcohol-based solvents or water.
**Recommended Pre-use Verifications**
| Item to Verify | Focus Areas |
|---|---|
| Substrate and Adhesion | Surface treatment of substrates (e.g., metals), adhesion, and cross-cut test results |
| Dilution Solvents | Use ethers, alkanes, or similar solvents; do not use alcohol-based solvents or water |
| Catalysts and Curing Conditions | Selection of appropriate catalysts; curing methods (room temperature vs. heat curing) |
| Film Thickness and Surface Drying | Surface-dry time, full-cure time, and the impact of film thickness on performance |
| Hardness and Cross-linking | Hardness, degree of cross-linking, and mechanical properties under various curing conditions |
| Solvent Resistance and Protection | Resistance to alcohols, ketones, and other organic solvents; validation for anti-graffiti and anti-corrosion applications |
| Tool Cleaning | Clean immediately after use with acetone or mineral spirits; if cured, treat as one would handle strong alkali residues |
| Storage and Opening | Two-year shelf life if unopened; once opened, store in a sealed, cool, and dry environment—purge with nitrogen if used in humid conditions |
Product documentation for **IOTA 9150** provides specifications such as appearance, solids content, additive content, molecular weight, viscosity, density, surface-dry time, full-cure conditions, hardness, light transmission, water contact angle, and metal adhesion. It also outlines potential applications, including anti-graffiti coatings for buildings, anti-corrosion coatings for metals, curing agents for silicone resins, and hardening agents for general organic resins. For applications involving room-temperature curing, high-hardness transparent coatings, anti-graffiti/anti-corrosion protection, or the curing of silicone resins, it is recommended to conduct comparative tests—while keeping the substrate, formulation, and curing conditions constant—in order to determine the specific application protocol for **IOTA 9150**.